Slitting and cut-to-length line for coiled steel
Contact manager

This line designed for coiled steel slitting and cut-to-length, metal-strip flattening. We manufacturing big variety of such lines with different technical characteristics depending on required process material thickness, cutting type and line performance.

Slitting and cut-to-length line for coiled steel
Completeness:
  • Decoiler – 1 pc
  • Straightening tool – 1 pc
  • Roller shears– 1 pc
  • Guillotine shears – 1 pc
  • Pulling shafts– 2 pc
  • Receiving stacking table – 2 pc
  • Tightening tool– 1 pc
  • Coiler – 1 pc
  • Unloading carriage – 1 pc
  • Loading carriage – 1 pc
  • Control cabinet – 1 pc
  • Options
  • Description
  • Sketches
Parameter's or size's name The value or setting
Process material Galvanized sheet steel from continuous lines, coil rolled sheet material with protective decorative paint-and-lacquer coating (domestic and imported production)
Thickness of process material 0,3 – 2,5 mm
Cutting speed 20 / 40 running meter/min
Accuracy of cutting into strips ± 0,2 mm
Accuracy of cutting into sheets ± 2 mm
Maximum number of cuts 8-12 (25) pcs
Maximum length of the sheets received by the receiving stacking table 3000 mm
Decoiler type Rack electromechanical, with a frequency converter
Decoiler load-lifting capacity 10000 kg
Coiler type Cantilevered electric, with a frequency converter
Coiler load-lifting capacity 8000 kg
Operation mode Semiautomatic
Type of the unloading carriage Hydraulic
Lifting capacity of the unloading carriage 8000 kg
Control cabinet Secures automatic operation after loading material into the line
Maintenance staff 2 persons
Rated power 50 kW

 This line designed for coiled steel slitting and cut-to-length, and metal-strip flattening. We manufacturing big variety of such lines with different technical characteristics depending on required process material thickness, cutting type and line performance.

It is possible to make our product customization by changing aggregates and line complete set to comply with Client’s technical specifications (loading by crane or by hydraulic loading carriage, normal or advanced sheet flatness, cutting chart for one or few alternatives, cutting in one or two directions from decoiler etc.)

We guarantee high-quality finished products due to the automatic control system.Process accuracy tracking system allows you to control end product conformity to specified requirements and adjust equipment operation mode to increase production efficiency.

 

Complete set of equipment for line:

  • Decoiler – 1 pc.

  • Roller leveller – 1 pc.

  • Slitting gang shears – 1 pc.

  • Guillotine shears – 1 pc.

  • Edge-winder– 2 pcs.

  • Receiving table – 1 pc.

  • Tensioner unit – 1 pc.

  • Coiler – 1 pc.

  • Loading carriage – 1 pc.

  • Unloading carriage – 1 pc.

  • Control cabinet – 1pc.

Slitting and cut-to-length line overall diagram

sketches
Ready to order? If you want to cooperate with us , please fill in the form below and our managers will contact you in the near future?