Automatic line for production of sectional shapes for assembly of plaster-cardbord plates
Contact manager

Europrofline offering 2-stream production lines for full set of KNAUF C- and U-profiles (CD/C50/C75/C100/U50/U75/U100/UD) and mobile lines for CD and UD profiles production. Products received from these lines have a wide range of applications in building and construction industry such inside walling, carcassing, facing etc.

Automatic line for production of sectional shapes for assembly of plaster-cardbord plates
Completeness:
  • Decoiler – 2 pcs.
  • Roll forming mill – 1 pcs.
  • Cut-off unit – 1 pcs.
  • Receiving roller table – 4 pcs.
  • Control cabinet – 2 pcs.
  • Options
  • Description
  • Sketches
Parameter's or size's name The value or setting
Raw material Galvanized sheet steel from continuous lines
Thickness of raw material 0.35-0.5 mm
Profile types CD / UD / C50 / C75 / C100 / U50 / U75 / U100
Width of the workpiece 123 mm / 80 mm / 157 mm / 182 mm / 207 mm / 129 mm / 154 mm / 179 mm
Profiling speed 12/40/70 running meter/minute
Cut-off unit type Electromechanical «flying cut»
Cut-off accuracy ± 5 mm
Drive Hydraulic, stationary accommodation
Decoiler type Cantilevered, electric
Decoiler load-lifting capacity 2000 kg
Operation mode Semiautomatic
Drive Electromechanical, worm gear motor
Gear Chain
Control cabinet Provides automatic operation after loading raw material into roll forming mill; equipped with frequency converter
Maintenance staff 2 persons
Rated power 15.4 kW

Automatic line for production of sectional shapes for assembly of plaster-cardbord plates

Products received from this line have a wide range of applications in building and construction industry such inside walling, carcassing, facing etc.

 

Profiles types: CD (60х27), UD (28х27), C50 (CW50, 50х50), C75 (CW75, 75х50), C100 (CW100, 100х50), U50 (UW50, 50х40), U75 (UW75, 75х40), U100 (UW100, 100х40) and various modifications.

 

To save the workspace it’s possible to use two-stream lines (two independent lines, assembled on one frame and operated from different sides), as well as to group several profiles into one stream.

 

Complete set of equipment for line:

  • Decoiler – 2 pc.

  • Roll forming mill – 1 pc.

  • Cutter unit 2pc.

  • Receiving table – 4 pc.

  • Control cabinet2pc.

 

2. Optional equipment

  • Device for profile inkjet marking

  • Punching device for profiles UD, U50, U75, U100.

  • "Volatile" press-stamp with hole type “butterfly”

  • Receiving table with ejection to collector

  • Knurling tool for reinforcing of profiles full-width

CD, UD, C50, C75, C100, U50, U75, U100 KNAUF profiles production line

sketches

Profile CD

sketches

Profile UD

sketches

Profile C-75

sketches

Profile C-100

sketches
Ready to order? If you want to cooperate with us , please fill in the form below and our managers will contact you in the near future?