Line for reinforcing metal profiles production
Contact manager

Production of various shapes and wall-thickness reinforcing metal profiles allows not only to provide required shape for frameworks but also to keep them. Due to console mounting of profiling rolls and multipurpose abrasive cutter unit the line allows to produce a wide range of profile types with minimum change-over time.

Line for reinforcing metal profiles production
Completeness:
  • Decoiler – 1 pc
  • Roll forming mill – 1 pc
  • Cut off device – 1 pc
  • Receiving stacking table – 2 pc
  • Control cabinet – 1 pc
  • Options
  • Description
Parameter's or size's name The value or setting
Process material Galvanized sheet steel from continuous lines in accordance with State Standart 14918 (Application: cold shape forming)
Maximum thickness of process material / with coupling earrings 1,5 mm / 2,0 mm
Maximum width of the workpiece 210 mm
Profiling speed 20 running meter/minute
Cutting accuracy in length ± 2 mm
Decoiler load-lifting capacity 2000 kg
Decoiler type Cantilevered, electric
Type of roll forming mill Cantilever
Type of the cut-off unit Disk saw
Operation mode Semiautomatic
Drive Electromechanical, worm gear motor
Gear Chain
Maximum length of the sheets received by the receiving stacking table 4000 mm
Control cabinet Secures automatic operation after loading the raw material into roll-forming mill; equipped with frequency converter
Maintenance staff 1-2 persons
Rated power 10 kW

Production of various shapes and wall-thickness reinforcing metal profiles allows not only to provide required shape for frameworks but also to keep them. Due to console mounting of profiling rolls and multipurpose abrasive cutter unit the line allows to produce a wide range of profile types with minimum change-over time.

 

Basic profiles for these type of line are reinforcing PVC frame profiles, vent laths, plasterboard systems profiles, steel stanchion and fencing structures profiles, rack storage systems profiles, furniture accessories profiles etc.

We guarantee high-quality finished products due to the automatic control system.Process accuracy tracking system allows you to control end product conformity to specified requirements and adjust equipment operation mode to increase production efficiency.

 

1.Complete set of equipment for line:

 

  • Decoiler – 1 pc.

  • Roll forming mill – 1 pc.

  • Cutter unit1pc.

  • Receiving table – 2 pc.

  • Control cabinet1pc.

 

2. Optional equipment

  • Tightening shackles for a thickness of 1.5 mm to 2 mm.

  • Punching device

  • Receiving table with ejection to collector

  • Device for profile inkjet marking

  • Volatile cutter unit

Ready to order? If you want to cooperate with us , please fill in the form below and our managers will contact you in the near future?