- Line for armoring sectioned shapes production
- Automatic line for longitudinal/transverse cutting of coiled steel
- Automatic line for production of sectional shapes for assembly of plaster-cardbord plates
- Line for KNAUF brackets and connectors production
- Llines for gutter system production
- Line for metal profiled sheeting and metal decking production
- Automatic lines for metal structural C, U, Z, Sigma profiles production
- Line for metal siding production
- Line for pale metal fence production
- Line for «Sandwich» panels production
- Universal line for producing ventilated profiles
- Line for metal screed strip and spackling angle production
- Lines for round and straight ridge cap production
- Combined line for finishing accessories production
- Equipment for manufacturing of warehouse storage racks
- Line for production of facade cassettes
- Line for packing
These lines are designed for production of most popular metal tile roofing types “Monterrey”, “Super Monterrey”, “Adamante”, “Cascade” etc. Tile roofing types differ by wave design and height, step size. Line for metal tile roofing production from Europrofline allows to expand the range of finished products by using metal with protective/decorative paint-and-lacquer coating.
- Decoiler – 1 pc
- Roll forming mill – 1 pc
- Stamping press – 1 pc
- Guillotine shears – 1 pc
- Hydraulic station– 1 pc
- Receiving roller table – 1 pc
- Control cabinet – 1 pc
|Parameter's or size's name||The value or setting|
|Process material||Galvanized sheet steel from continuous lines, coil rolled sheet material with protective decorative paint-and-lacquer coating (domestic and imported production)|
|Thickness of process material||0,45-0,5 mm|
|Width of the workpiece||1250 mm|
|Profiling speed||6 running meter/minute|
|Cutting accuracy||± 2 mm|
|Decoiler type||Stand electromechanical, completed by frequency converter|
|Decoiler load-lifting capacity||8 000 kg|
|Drive||Electromechanical, worm gear motor|
|Maximum length of the sheets received by the receiving stacking table||6000 mm|
|Minimum length of the sheets received by the receiving stacking table||2000 mm|
|Control cabinet||Secures automatic operation after loading raw material into roll forming mill; equipped with frequency converter|
|Maintenance staff||2 persons|
|Rated power||30 kW|
Line for metal tile roofing manufacturing “Monterrey”, “Super Monterrey”, “Adamant”, “Cascade”
These lines are designed for production of most popular metal tile roofing types “Monterrey”, “Super Monterrey”, “Adamante”, “Cascade” etc. Tile roofing types differ by wave design and height, step size. Equipment manufactured by Europrofline allows to produce wide range of high quality products competitive with the world lead manufacturers. End products are used for roofing systems in industrial and civil constructions providing required operating conditions.
The line for metal tile roofing production from Europrofline allows to expand the range of finished products by using metal with protective/decorative paint-and-lacquer coating.
We guarantee high-quality finished products due to the automatic control system.Process accuracy tracking system allows you to control end product conformity to specified requirements and adjust equipment operation mode to increase production efficiency.
Devise for film deposition
Closers for receiving table
Device for centering of packs.
Conveyor and additional receiving roller table.
3D cutting device.